General Articles

The Importance of Deaerators

Steam generation systems in industrial and utility settings are highly sensitive, depending on various machines to maintain proper function. Among these devices is the deaerator. Though dissolved gases in feedwater are not often the first to come to mind for boiler safety concerns, a boiler’s efficiency and integrity can be compromised over time by aerated feedwater. Thus, the boost to equipment lifespan and function that deaerators provide is well worth understanding.

Why Deaeration Is Vital

Dissolved oxygen and carbon dioxide can cause severe damage to steel, iron and copper pipes, as well as any other equipment aerated water runs through or remains in contact with. Oxygen is well-known for causing iron and steel alloys to rust if not properly treated, but water containing dissolved oxygen amplifies the risk because the oxygen can more readily bind to the metal. Additionally, carbon dioxide dissolved in water forms carbonic acid that also can corrode metals.

How Deaerators Work

Deaerators are designed to reduce the concentration of dissolved oxygen and carbon dioxide in water to safe levels. The deaerator uses a flow of steam to ‘scrub’ feedwater, heating and agitating it to reduce gas solubility and carrying away the released gases. These gases, and a portion of the steam, are vented out of the system, and the treated water flows into a storage tank. In order to maximize the scrubbing effect of the steam, undeaerated water is either input as a fine spray of droplets or allowed to cascade down multiple trays while steam flows upward, depending on the models that the deaerator supplier offers. Many designs pass feedwater through two or more stages of deaeration, ultimately removing all carbon dioxide and reducing the oxygen content to below 10 parts per billion (ppb).

Effective deaerator operation, optionally combined with chemical ‘oxygen scavengers’, can significantly extend the life of boilers and other equipment, reduce operation costs and improve quality of steam output.

Read More
General Articles

Why You Should Consider Hiring an Architect for Your Dream Home

If you’re like many people, a home is one of the biggest investments you’ll ever make. Living in your dream home can be a lofty pursuit if for no other reason than that it primarily exists only in your mind. Whether building from scratch or renovating an existing structure, this project requires careful planning. Consider hiring a residential architect to help you plan, design and build your dream.

Developing a Plan

You have a lot of ideas about what you want in a dream home. A trained provider of architectural design services has the knowledge and expertise to help turn those ideas into a thorough, workable plan.  The right designer not only sees the big picture but also understands the various details that comprise it. It is far easier and less expensive to move walls in the planning phase than during construction. Your architect will create schematic drawings and conceptual plans to get the project started the right way.

Designing and Permitting

The next phase involves generating detailed blueprints and specifications for the home. Your designer will produce drawings that merge the aesthetic details with requirements from governing building codes. These plans include details about the finishes and materials you have selected and discussed with a hired professional. Also, they can develop the documents necessary to secure permits for the next, exciting phase: construction.

Building Your Home

Your architect best understands the details of this project, so consider hiring them to oversee construction.  Not only will they know the best contractors and subcontractors to make your home a reality, but they can also provide construction administration services. Your professional can communicate the needs of the job to a contractor and respond to any inquiries or solve any issues that arise.

You have invested time and money into preparing for a dream home. Hire a licensed residential architect to guide you through the entire process from planning through construction. They have the knowledge and understanding to anticipate and address issues, and make this project a success.…

Read More
General Articles

Safely Work at Night on Your Construction Project

Working at night has different risks than working in the daytime. Sometimes a job just requires working in the darkness to make sure it’s completed by the deadline. Roadways are commonly worked on at night in busy metropolitan areas to cause less traffic delays during the morning and evening commutes. Here are some ways to keep your project safe at night.


Commercial led lighting Denver lights up the dark. A well-lit project helps workers avoid slips and falls and making mistakes. Temporary lights are movable, so you can have the light exactly where you need it. The bright LED bulbs have a wider and longer reach than incandescent allowing you to use fewer lights.


Working at night must be done safely for the sake of your employee’s well-being and health. The circadian rhythm in the body isn’t designed to work overnight. Over time, working long night shifts can have an impact on the mental and physical health of your employees. The circadian rhythm is more than just your sleep cycle. It affects blood pressure, body temperature regulation, adrenaline secretion, digestion and metabolism. Keep an eye on your employee’s stress, concentration and fatigue as they can lead to accidents on the job.


Management isn’t immune to the negative effects of working overnight. However, as they are in charge of the project and employees, they should develop a risk assessment plan for dealing with the change in work conditions. A little pre-planning can go a long way to avoiding accidents and mistakes that can derail the project.


Have a plan in place before a set of night shifts. These plans should address the inherent risks associated with working at night such as those mentioned above. Prep workers ahead of time by giving them some guidelines to help them cope with the change in schedule such as eating well and maintaining a regular sleep schedule.…

Read More
General Articles

3 “F” Home Improvements You Can Do Overnight

Excited about a home makeover? Many people choose to refresh their living spaces and are accomplishing it on a budget. Here are a couple of ideas that will not only improve your home décor but are also easily accomplished in a short amount of time without a bunch of cash.


A new statement piece can completely change a room. For example, if you have an ocean colored office with wood trimming, the addition of a nautical themed table can gift the entire room with a new focal point. It is easy to shop for new pieces, just look in magazines or online. Try searching for something like furniture San Francisco CA. Measure the space beforehand so you know what dimensions you are looking for.


There is a reason why tapestries hung in old castles. They added something beautiful to the space. You may not want a large battle scene hanging in your living room but consider a new rug underneath your dining room table, or perhaps a ribbon a fabric framing a family portrait. The new textures can add a touch of elegance to any décor.

Another great choice is a runner if you have stairs. The new fabric’s additions can bring some color to your climb and make the journey safer if your stairway is slippery.


You do not have to replace all your cabinets to reclaim your kitchen. That can quickly drain your pocketbook and your energy if you’re trying to do it yourself. Instead, you can reach for a fresh can of paint to do the trick. This may take a little longer than overnight, but the finished product can transform your kitchen into a place you will want to be.

Any of these projects can bring life to your home. Whether you choose a new sofa to tie in a theme, throw up a great new wall-hanging, or refinish your cabinets, you can sit back and be satisfied with time well-spent and money saved.…

Read More
Room Additions

Best Lavatory Remodel Contractor In San Jose, CA

For many individuals house renovation comes earlier than toilet remodeling and this a part of the house is all the time neglected throughout most renovation tasks. In addition to the return on investment; however, many householders have elected to show their as soon as utilitarian bogs into home spas. If you are going to go all out with a toilet remodel, why probably not go all out and add a steam bathe? Vanities are all the time a nice addition, irrespective of if it is the visitor or grasp bathroom.\n\nThe small rest room transform has an enormous potential! Tear out the present piping (Photographs 5 and 6). Then frame the two×6 walls that will comprise the brand new plumbing and the other finish of the shower base (Images 8, 9 and 14). If nothing else is going to do it for you, there’s all the time the final option of an entire overhaul of your current bathroom.\n\nThese surfaces embody your walls, flooring, and ceilings. On top of that, toilet remodeling offers you an eighty% to 90% return on investment should you ever decide to sell your property. You might want to look into a number of the other issues in the room as effectively, like your flooring and lighting.\n\nOne of the vital vital issues you will want to know if you begin your remodeling adventure is the best way to incorporate a bath gentle match into your new grasp, half, or full toilet. Performing a do-it-your self remodel will certainly help get monetary savings since you will not need to pay for labor.…

Read More